Bar tie twister

Automatic hooks are used as follows:

1. First introduce the tying method. Hold the tie hook in one hand, fold the tie wire in half with the other hand, and Pierce it diagonally from the steel bar.

2 Pull out the tie wire and hook the tie wire.

3 Hook the tie wire, cross the tie wire, turn the tie wire with the tie hook, tighten the tie wire.

4 Horizontal reinforcement, the top distance is drawn with a stone pen, and then the upper reinforcement is tied up with a wire tie, the following reinforcement is pulled to the corner with a wire tie, and then the others.

5 The binding method of vertical steel bar, to cooperate with more than two people, the steel bar is lifted into place, tied up with tie wire, positioning, the horizontal and vertical steel bar are positioned so that the back does not need to be positioned.

6 Pull the steel bar to the corner, the corner is tight, afraid of not tight cross tie method, is x tie method, so that the steel bar will not shrink down, as long as the technique is good, the speed will be faster